Liquid Screed Installation in Evesham

Looking for reliable liquid screed Evesham specialists who can keep your project on schedule and your floors perfectly level? We supply and pump-apply fast-drying flow screed Evesham builders, renovators and self-builders count on for flawless finishes and rapid walk-on times.

Get your quick quote now

*This field is required

Start Your Quick Quote

*You must enter a correct email

Next

*This field is required

Next

Next

Next

*This field is required
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Why Choose Cotswold Flow Screed?

water or wet icon

Dedicated Liquid Screed Specialists

Unlike general screeders, we focus solely on anhydrite screed Evesham and cement liquid screed Evesham solutions. That single-minded approach means our crews understand everything from slump flow to calcium sulphate compatibility—invaluable when floor tolerance and deadlines are tight.

concrete lorry icon

Pump-Applied Efficiency & SR2 Finish

Our Flowmix-supplied pumps lay up to 1 000 m² per day, achieving SR2 surface flatness with minimal joints and just 30 mm minimum depth. Less labour, less waste, more programme certainty.

map icon

Local Team, Regional Reach

Based in Evesham, we’re on site in minutes across Evesham, Pershore and Bidford-on-Avon—yet we still cover Worcestershire, Gloucestershire, Warwickshire, Oxfordshire and Wiltshire for multi-plot developers.

Our Liquid Screed Installation Process

1. Sub-Floor Preparation & Advice
plus icon

We assess substrate moisture, insulation layout and edge detailing. Need a vapour barrier or slip membrane? Our team specifies what’s required before the pump arrives, protecting your warranty and the screed’s long-term performance.

2. Precision Pumping & Levelling
plus icon

On pour day we position the high-yield pump, mix in real time and deliver screed directly to the slab at up to 20 m³ per hour. Laser levels and tripods guarantee consistent depth—even around tricky manifolds for underfloor heating screed specialist applications.

3. Rapid Cure & After-Care
plus icon

Foot-traffic is possible within 24–48 hours. We provide drying rate charts, moisture testing guidance and optional post-install sanding so floor layers can bond adhesives with confidence.

Key Benefits for Evesham Builds

fast rapid click icon

Speed & Programme Certainty

Pump-applied screed means larger pours, fewer joints and earlier follow-on trades.

spanner icon

Thermal Optimisation For Underfloor Heating

Low thermal expansion and high conductivity wrap pipes efficiently, boosting heat-up times.

flash icon

Eco Credentials & Finish Quality

Up to 36 % recycled content and an SR2 surface reduce environmental impact and costly floor prep.

floor thickness icon

Reduced Thickness

At 30 mm minimum depth, rooms keep headroom and structural loads stay light.

house crack icon

Crack Resistance

Uniform curing minimises shrinkage, so no reinforcement mesh or curling headaches.

FAQ's

How quickly can I walk on newly poured liquid screed?
plus icon

Most floors accept foot-traffic in 24–48 hours, depending on site temperature and ventilation

What’s the difference between anhydrite and cement liquid screeds?
plus icon

Anhydrite screeds offer excellent flow and thin depth; cementitious versions cure faster in cooler sites and accept earlier tiling. We advise which mix suits your programme.

Is liquid screed suitable over underfloor heating pipes?
plus icon

Absolutely. High flowability encapsulates pipes completely, delivering superb thermal conductivity screed performance.

Do you handle floor sanding or laitance removal?
plus icon

Yes, we offer optional mechanical sanding once the screed reaches suitable moisture content.

What surface flatness can I expect?
plus icon

We routinely achieve SR2—or better—with no need for power-floating.

How long before I can install floor coverings?
plus icon

Drying times vary; as a rule of thumb allow one day per millimetre for the first 40 mm. We supply moisture testing guidelines so you can fit timber or tiles with confidence.

About Cotswold Flow Screed

Cotswold Flow Screed is a specialist liquid-screeding contractor headquartered in Evesham, Worcestershire WR11 3GD. Working alongside Flowmix, they pump-apply Gyvlon anhydrite and Cemfloor cementitious screeds to domestic and commercial projects across Gloucestershire, Worcestershire, Warwickshire, the Cotswolds, Herefordshire, Oxfordshire and Wiltshire. Up to 1 000 m² can be installed daily, delivering SR2-level finishes, rapid walk-on times and depths from just 30 mm. Cotswold Flow Screed’s sister company, Underfloor Heating Technologies, provides complementary wet-UFH design and installation services.

Find Out More