Liquid Screed Installation in Cheltenham

Searching for liquid screed Cheltenham builders, renovators and homeowners can trust? We deliver precision-poured flow screeds that set faster, conduct heat better and leave floors perfectly level—backed by local experts who speak your language.

Get your quick quote now

*This field is required

Start Your Quick Quote

*You must enter a correct email

Next

*This field is required

Next

Next

Next

*This field is required
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Why Choose Cotswold Flow Screed?

water or wet icon

Sustainability & safety focus

Our anhydrite mix contains up to 36 % recycled content, pours from 30 mm depth and is pump-placed at up to 1 000 m² per day—slashing lorry movements, site waste and carbon compared with traditional screed. CSCS-qualified crews follow HSE best practice, and every pour meets SR2 surface regularity for a finish you can tile straight onto.

concrete lorry icon

Accredited materials & UFH integration

We’re approved installers of Gyvlon® Anhydrite Liquid Screed and Cemfloor® Cementitious Liquid Screed, delivered fresh by batching partner Flowmix for rock-solid consistency. Need radiant heating too? Our sister company Underfloor Heating Technologies (UFHT) designs and lays wet-UFH systems, giving you a single point of accountability from pipework to polished screed

map icon

Gloucestershire coverage & quick lead times

Our base in Evesham puts us minutes from Cheltenham, Bishops Cleeve and the wider Cotswolds, so site visits and pour dates slot neatly into your programme. We serve Gloucestershire, Worcestershire, Warwickshire, Herefordshire, Oxfordshire, Wiltshire and the Cotswolds every week.

Our Liquid Screed Process

1. Pre-pour survey & preparation
plus icon

We inspect substrates, insulation layouts and movement joints, supplying edge strip, vapour control layers and primer where required. Clear guidance helps your team achieve screed-ready conditions first time.

2. Pumping, levelling & quality checks
plus icon

On pour day, our high-output pump feeds the liquid screed directly from the Flowmix truck to the slab. The mix self-compacts; we dapple to release air and verify depths, then laser-check levels before sign-off.

3. Curing, access & optional sanding
plus icon

Floors are walkable within 24–48 hours, and light loading is typically possible after seven days. When the laitance film appears, we can return to sand and vacuum—creating a pristine key for tiles, LVT or timber.

Key Benefits for Worcester Properties

fast rapid click icon

Rapid drying floor screed

Earlier hand-over keeps extensions and refurbishments on schedule.

Floor icon

Underfloor-heating ready

High thermal conductivity means quicker warm-up and lower running costs.

flash icon

Eco-friendly choice

Up to 36 % recycled binder and fewer vehicle movements lighten your project’s footprint.

floor thickness icon

Slim build-up

Structural strength at 30–50 mm saves ceiling height or frees space for extra insulation.

map icon

Local know-how

We understand Cheltenham’s mix of Regency terraces, new-build estates and countryside barns, advising on best practices for each build style.

FAQ's

How far in advance should I book a pour?
plus icon

Once our survey confirms readiness, we can usually schedule installation within a couple of weeks, subject to batching slots. This is a very rough estimate, please contact us for a better estimation.

Does liquid screed crack like sand-cement?
plus icon

Anhydrite’s low-shrinkage formula, combined with correct movement joints and curing, makes cracking uncommon.

Can you screed over an existing concrete slab?
plus icon

Yes. We prime the concrete and pour a minimum 25 – 30 mm bonded or unbonded layer depending on load and finish.

 Is liquid screed suitable over timber joists?
plus icon

Our cement liquid screed can be laid over structural deck panels on joists, giving a solid, robust floor.

How do we confirm moisture is low enough for floor coverings?
plus icon

We provide carbide bomb or in-situ RH test reports so finish trades can proceed with confidence.

Do I need the laitance removed?
plus icon

Light sanding after 7–10 days boosts adhesive bond strength and is highly recommended.

About Cotswold Flow Screed

Cotswold Flow Screed is a family-run liquid screed specialist headquartered in Evesham, Worcestershire WR11 3GD. The company supplies and installs Gyvlon and Cemfloor flow screeds across Gloucestershire, Worcestershire, Warwickshire, Herefordshire, Oxfordshire, Wiltshire and the Cotswolds. Working alongside sister company Underfloor Heating Technologies, Cotswold Flow Screed offers integrated underfloor-heating and screed solutions for domestic and commercial builds.

Contact Us